Knife dudes first blog.

Why You Should Own A Damascus Steel Knife Posted on 28 Mar 14:45 , 0 comments

Whether you have just started on your journey as a knife collector or you have been collecting them for years, there is a certain type of hunting knife that will not only be a great addition to your collection, but also a valuable one and one that every knife collector or knife hunter should have with them. It is a historically famous knife that has been awed at for centuries and one that will most likely never go out of style.

 

 

Highly Functional

 

 

Handmade hunting knives made from Damascus steel are some of the best knives in the world and are also some of the strongest. There is a reason why this type of steel has been used throughout history in sword making, especially in swords from the Middle East and India which were considered some of the strongest of their time.

 

 

When it comes to hunting, you need a strong knife. Animal skin can be very tough and not any knife will do to get the job done. Custom Damascus knives which are made specifically for you will make sure that you get the cut without making the animal suffer, which is important in hunting. A knife that is made from poor quality materials is not only a frustrating experience for you, the hunter, but it is also cruel for the animals.

 

 

Custom Damascus knives are considered to get their strength from the unique way they are made. With the beautiful patterns being forged through intense heat and the metal layers blending together, these custom Damascus hunting knives provide hunters with blades that will ensure that your hunt is a successful one.

 

 

Incredibly Beautiful

 

 

Handmade hunting knives that are made from strong steel are dependable and functional, but there is also something uniquely beautiful about their blades which makes them a perfect gift for someone who not only loves hunting but who also loves knives. Whether it is due to the way that they are made which creates a blade with flowing patterns or because they are custom made for you with the design that you desire, custom Damascus hunting knives are not only some of the most functional knives for hunting, they are also some of the most aesthetically pleasing.

 

 

Custom Damascus hunting knives can be made specifically for someone who is looking for a unique design and a certain level of strength. Throughout history, knives and swords made out of Damascus steel have drawn attention for their aesthetics and while their strength is also a big factor in their popularity, many hunters and ancient warriors considered their beauty to be a valuable reason to own one.

 

 

Most average hunting knives have a simple blade without much to them, but these blades are intricate and unique making them a favorite amongst hunters and collectors alike. Many knife collectors continually look for Damascus knives to add to their collection as it is difficult to find such incredibly patterned blades elsewhere.

 

 

In Conclusion

 

 

Whether you are searching for that perfect knife to add to your knife collection to complete it or you are an avid hunter who loves to use strong blades, a custom-made knife with a Damascus steel blade will provide you with the satisfaction you are looking for. These types of knives have been famous throughout history, gaining popularity in the Middle East and remaining highly recognized staples of the world of hunting and knife collecting. They promise strength and durability while also remaining beautiful throughout the years.

 

 

From their functionality that ensures a clean kill while on the hunt to their beauty and uniqueness as a weapon, Damascus knives are what any knife fanatic should have in their collection. At Knife Dude we have the best handmade hunting knives around and whether you want one for hunting, for your protection, or simply to stop and admire from time to time, we can help you to create and find the knife that is just perfect for you.

Custom Damascus Knives, what knife steel do they make this damascus knife with? Posted on 10 Feb 13:56 , 0 comments

Modern Damascus Steel or "Pattern Welding"

Pattern welding is the practice in sword and blade making of structuring a cutting edge of a few metal bits of varying piece that are manufacture welded together and contorted and controlled to structure the pattern in a custom damascus knife.. Regularly called (Modern) Damascus steel, sharpened pieces of steels manufactured in this way frequently show groups of somewhat distinctive designing along their whole length. These groups can be highlighted for corrective purposes by fitting cleaning or corrosive drawing. Pattern welding was an outgrowth of covered or heaped steel, a comparable procedure used to consolidate steels of distinctive carbon substance, giving a craved blend of hardness and strength. Albeit current steel-making courses of action refute the need to mix diverse steels, example welded steel is still utilized by custom knife-makers for the nonessential impacts it delivers.



Pattern welding created out of the essentially intricate procedure of making edges that were both hard and intense from the flighty and unacceptable yield from ahead of schedule iron purifying in bloomeries. The bloomery does not produce temperatures sufficiently high to liquefy iron and steel, yet rather diminishes the iron oxide mineral into particles of unadulterated iron, which then weld into a mass of wipe iron, comprising of chunks of contaminations in a grid of generally immaculate iron, which is so delicate it is not possible make a decent razor sharp edge. Carburizing slender iron bars or plates structures a layer of harder, high carbon steel at first glance, and early bladesmiths would manufacture these bars or plates together to structure generally homogeneous bars of steel. This covering distinctive sorts of steels together delivers designs that can be seen in the surface of the completed razor sharp edge, and this structures the premise for Pattern welding of the Damascus Knife.

Pattern welding of Damascus Knives in Europe

By the second and third century AD, the Celts were generally utilizing pattern welding for beautification as a part of expansion to structural reasons. It included collapsing metal and producing substituting layers of steel into poles, which would then be bent to structure complex examples when produced into a cutting edge. By the sixth and seventh hundreds of years, pattern welding had arrived at a level where slender layers of designed steel were being overlaid onto a delicate iron center, bringing about a noticeable improvement as the iron provided for them an adaptable and springy center that would take any stun from sword hits to stop the cutting edge bowing or snapping. Before the end of the Viking period, pattern welding dropped out of utilization in Europe.

Amid the Middle ages, Damascus knives were being delivered in India and brought again to Europe. The likenesses in the markings persuaded it was the same methodology being utilized, and pattern welding was restored by European smiths who were endeavoring to copy these beautiful Damascus Knives. While the routines utilized by Damascus smiths to create their razor sharp edges was lost, late endeavors by metallurgists and bladesmiths, (for example, Verhoeven and Pendray) to duplicate steel with indistinguishable attributes have yielded a process that does not include pattern welding. However even these endeavors have not been an enormous achievement.

A comparative system was additionally utilized by Scandinavian Medieval swordsmiths. The Mora blade is today fabricated with a comparable strategy. Today the customary pot steel is from time to time utilized, yet the high carbon steel is normally device steel or stainless steel.

Present day beautiful utilization to show how to make a custom Damascus Knife. 

The old swordmakers abused the tasteful characteristics of pattern welded steel. The Vikings specifically were enamored with curving bars of steel around one another, welding the bars together by pounding and after that rehashing the procedure with the ensuing bars, to make complex examples in the last steel bar. Two bars bent in inverse bearings made the normal chevron design. Regularly, the core of the cutting edge was a center of delicate steel, and the edges were robust high carbon steel, like the covers of the Japanese.

The American Bladesmith Society's Master Smith test, for instance, obliges a 300 layer edge to be produced. Huge quantities of layers are by and large created by collapsing, where a little number of layers are welded together, then the clear is cut fifty-fifty, stacked, and welded once more, with every operation multiplying the quantity of layers. Beginning with only two layers, eight collapsing operations will yield 512 layers in the clear. A razor sharp edge ground from such a clear will demonstrate a grain much like an item cut from a piece of wood, with comparative arbitrary varieties in example. Some made articles can be re-purposed into pattern welded spaces. "Cable Damascus", manufactured from high carbon multi-strand link, is a prominent thing for bladesmiths to deliver, creating a finely grained, wound example, while cutting apparatus chains create an example of arbitrarily situated blobs of shade.

Some current bladesmiths have taken pattern welding to new statures, with extensive applications of conventional damascus knife welding procedures, and in addition with new innovation. A layered billet of steel bars with the edge clear slice perpendicular to the layers can likewise deliver some awesome examples, including mosaics or actually composing. Powder metallurgy permits composites that would not regularly be good to be consolidated into robust bars. Diverse medicines of the steel after it is ground and cleaned, for example, dye, scratching, or different other synthetic surface medications that respond contrastingly to the distinctive metals utilized can make splendid, high-differentiate completes on the steel. Some expert smiths venture to utilize procedures, for example, electrical release machining to remove interlocking examples of diverse steels, fit them together, then weld the ensuing gathering into a strong piece of steel for their damascus knife blade 

Damascus Steel, a steel utilized as a part of sword-making amid the Medieval Period to make fine Damascus Knives, Swords and weapons.

Wootz steel, an Indian pot steel

Bulat steel, a Russian pot steel

Japanese sword development incorporates a particular manifestation of pattern welding.

Mokume-gane, a comparative system, regularly including valuable metals, used to create enhancing pieces

 


Knife Dude Posted on 9 Jan 15:50 , 0 comments

How do people remember you from your past? Most people probably remember me as the guy who always had a knife in his pocket. Knives are one of the most beautiful objects on earth, at once functional and also an art form. I am looking to provide some of the nicer custom damascus knives that are for sale at a decent price and also some more eclectic items such as throwing knives and tomahawks.  We will also be providing a mail in knife sharpening service in the near future.  I am a former Marine and believe everyone should have a knife in his or her pocket.  Let's make that happen.